[pLog-svn] r5284 - in plog/branches/lifetype-1.2: installlocale/admin
Mark Wu
markplace at gmail.com
Sun Apr 8 14:03:11 EDT 2007
Sure, I will take care of this.
Mark
> -----Original Message-----
> From: plog-svn-bounces at devel.lifetype.net
> [mailto:plog-svn-bounces at devel.lifetype.net] On Behalf Of
> jondaley at devel.lifetype.net
> Sent: Sunday, April 08, 2007 3:14 AM
> To: plog-svn at devel.lifetype.net
> Subject: [pLog-svn] r5284 - in plog/branches/lifetype-1.2:
> installlocale/admin
>
> Author: jondaley
> Date: 2007-04-07 15:13:31 -0400 (Sat, 07 Apr 2007) New Revision: 5284
>
> Modified:
> plog/branches/lifetype-1.2/install/defaultconfig.properties.php
> plog/branches/lifetype-1.2/locale/admin/locale_de_DE.php
> plog/branches/lifetype-1.2/locale/admin/locale_en_UK.php
> plog/branches/lifetype-1.2/locale/admin/locale_es_ES.php
> plog/branches/lifetype-1.2/locale/admin/locale_it_IT.php
> plog/branches/lifetype-1.2/locale/admin/locale_nl_NL.php
> Log:
> enabled HTTP cache by default. Is there any reason this
> wasn't enabled before? Mark - I don't know how to update the
> zh_* locales; I think I did the rest of the languages correctly
>
> Modified:
> plog/branches/lifetype-1.2/install/defaultconfig.properties.php
> ===================================================================
> ---
> plog/branches/lifetype-1.2/install/defaultconfig.propert
> ies.php 2007-04-07 19:02:28 UTC (rev 5283)
> +++
> plog/branches/lifetype-1.2/install/defaultconfig.propert
> ies.php 2007-04-07 19:13:31 UTC (rev 5284)
> @@ -104,7 +104,7 @@
> $Inserts['summary_show_agreement']
> = "INSERT INTO {dbprefix}config
> (config_key, config_value, value_type) VALUES
> ('summary_show_agreement', '1', 1);";
> $Inserts['default_time_offset']
> = "INSERT INTO {dbprefix}config
> (config_key, config_value, value_type) VALUES
> ('default_time_offset', '0', 3);";
> $Inserts['template_cache_enabled']
> = "INSERT INTO {dbprefix}config
> (config_key, config_value, value_type) VALUES
> ('template_cache_enabled', '1', 1);";
> -$Inserts['template_http_cache_enabled']
> = "INSERT INTO {dbprefix}config (config_key,
> config_value, value_type) VALUES
> ('template_http_cache_enabled', '0', 1);";
> +$Inserts['template_http_cache_enabled']
> = "INSERT INTO {dbprefix}config (config_key,
> config_value, value_type) VALUES
> ('template_http_cache_enabled', '1', 1);";
> $Inserts['template_compile_check']
> = "INSERT INTO {dbprefix}config
> (config_key, config_value, value_type) VALUES
> ('template_compile_check', '1', 1);";
> $Inserts['update_cached_article_reads']
> = "INSERT INTO {dbprefix}config (config_key,
> config_value, value_type) VALUES
> ('update_cached_article_reads', '1', 1);";
> $Inserts['allow_php_code_in_templates']
> = "INSERT INTO {dbprefix}config (config_key,
> config_value, value_type) VALUES
> ('allow_php_code_in_templates', '0', 1);";
>
> Modified: plog/branches/lifetype-1.2/locale/admin/locale_de_DE.php
> ===================================================================
> --- plog/branches/lifetype-1.2/locale/admin/locale_de_DE.php
> 2007-04-07 19:02:28 UTC (rev 5283)
> +++ plog/branches/lifetype-1.2/locale/admin/locale_de_DE.php
> 2007-04-07 19:13:31 UTC (rev 5284)
> @@ -616,7 +616,7 @@
> $messages['help_template_compile_check'] = 'Aktivieren Sie
> diese Funktion, um Dateien durch Smarty automatisch auf
> aktuellere Versionen prüfen zu lassen. Deaktivieren Sie
> diese Funktion, um die Perfomance zu steigern [Standard =
> Ja]'; $messages['help_template_cache_enabled'] = 'Aktivieren
> des Template-Cache. Wenn aktiviert, wird, falls möglich,
> eine zwischengespeicherte Version von Seiten benutzt.
> Dadurch müssen weniger Daten aus der Datenbank abgerufen
> und Templates seltener neu gerendert werden. [Standard =
> Ja]'; $messages['help_template_cache_lifetime'] =
> 'Verfallszeit des Cache in Sekunden. Setzen Sie den Wert auf
> -1, um den Cache nie verfallen zu lassen. Wenn Sie den Wert
> auf 0 setzen, wird der Cache deaktiviert. Setzen Sie hierzu
> allerdings besser "Aktivieren des Template-Cache" auf "Nein".
> [Standard = -1]';
> -$messages['help_template_http_cache_enabled'] =
> 'Unterstützung für HTTP-Request aktivieren. Wenn
> aktiviert, fügt LifeType dem HTTP-Header
> "If-Modified-Since"-Informationen zu. So muß nur
> unbedingt erforderlicher Inhalt gesendet werden. Benutzen Sie
> diese Einstellung, um Bandbreite zu sparen. [Standard = Nein]';
> +$messages['help_template_http_cache_enabled'] = 'Unterstützung
> +für HTTP-Request aktivieren. Wenn aktiviert, fügt LifeType
> +dem HTTP-Header "If-Modified-Since"-Informationen zu. So
> muß nur
> +unbedingt erforderlicher Inhalt gesendet werden. Benutzen Sie diese
> +Einstellung, um Bandbreite zu sparen. [Standard = Ja]';
> $messages['help_allow_php_code_in_templates'] = 'Nativen
> PHP-Code in Smarty-Templates innerhalb von {php}...{/php}
> Blöcken erlauben [Standard = Nein]'; // urls
> $messages['help_request_format_mode'] = 'Wählen Sie ein
> URL-Format. Wenn Sie benutzerdefinierte URLs verwenden
> möchten, stellen Sie sicher, dass die folgenden
> Einstellungen ebenfalls konfiguriert sind. [Standard = einfach]';
>
> Modified: plog/branches/lifetype-1.2/locale/admin/locale_en_UK.php
> ===================================================================
> --- plog/branches/lifetype-1.2/locale/admin/locale_en_UK.php
> 2007-04-07 19:02:28 UTC (rev 5283)
> +++ plog/branches/lifetype-1.2/locale/admin/locale_en_UK.php
> 2007-04-07 19:13:31 UTC (rev 5284)
> @@ -617,7 +617,7 @@
> $messages['help_template_compile_check'] = 'If enabled,
> Smarty will check every time if template files have changed
> and if so, use the new version. Set this to disabled for
> higher performance. [Default = Yes]';
> $messages['help_template_cache_enabled'] = 'Enable the
> template cache. If enabled, the cached version of a page will
> be used whenever possible. No data will need to be fetched
> from the database and templates will not need to be
> recompiled. [Default = Yes]';
> $messages['help_template_cache_lifetime'] = 'Lifetime in
> seconds of the cache. Set to -1 to force the cache to never
> expire. If set to 0, the cache will be disabled but it is
> recommended to set template_cache_enabled to "No" in order to
> disable the cache. [Default = -1]';
> -$messages['help_template_http_cache_enabled'] = 'Enable
> support for HTTP conditional requests. If enabled, LifeType
> will take the "If-Modified-Since" HTTP header into account
> and send only content if strictly needed. Enable this to save
> bandwidth [Default = No]';
> +$messages['help_template_http_cache_enabled'] = 'Enable support for
> +HTTP conditional requests. If enabled, LifeType will take the
> +"If-Modified-Since" HTTP header into account and send only
> content if
> +strictly needed. Enable this to save bandwidth [Default = Yes]';
> $messages['help_allow_php_code_in_templates'] = 'Allows to
> embed native PHP code in Smarty templates inside
> {php}...{/php} blocks. [Default = No]'; // urls
> $messages['help_request_format_mode'] = 'Select one of the
> available URL format. If using custom URLs, make sure to
> configure the settings below. [Default = Plain]';
>
> Modified: plog/branches/lifetype-1.2/locale/admin/locale_es_ES.php
> ===================================================================
> --- plog/branches/lifetype-1.2/locale/admin/locale_es_ES.php
> 2007-04-07 19:02:28 UTC (rev 5283)
> +++ plog/branches/lifetype-1.2/locale/admin/locale_es_ES.php
> 2007-04-07 19:13:31 UTC (rev 5284)
> @@ -607,7 +607,7 @@
> $messages['help_template_compile_check'] = 'Si se activa,
> Smarty comprobar si los ficheros de las plantillas han
> cambiado y si es as, las recompilar [Valor por defecto = S]';
> $messages['help_template_cache_enabled'] = 'Activa la cache
> de plantillas. Si est activada, las pginas de las bitcoras
> solo se generarn una vez y se usarn hasta que haya algun
> cambio. De esta forma, no ser necesario traer los datos desde
> la base de datos cada vez [Valor por defecto = S]';
> $messages['help_template_cache_lifetime'] = 'Tiempo en
> segundos de vida de la cach. Asigne -1 para que la cach nucna
> expire'; -$messages['help_template_http_cache_enabled'] =
> 'Activar el soporte para las peticiones condicionales va
> HTTP. Si se activa, LifeType tendr en cuenta el valor de la
> cabecera HTTP "If-Modified-Since" y solo enviar los datos en
> caso de que sea necesario para ahorrar ancho de banda [Valor
> por defecto = No]';
> +$messages['help_template_http_cache_enabled'] = 'Activar el soporte
> +para las peticiones condicionales va HTTP. Si se activa,
> LifeType tendr
> +en cuenta el valor de la cabecera HTTP "If-Modified-Since" y solo
> +enviar los datos en caso de que sea necesario para ahorrar ancho de
> +banda [Valor por defecto = S]';
> $messages['help_allow_php_code_in_templates'] = 'Permite
> incluir cdigo PHP en las plantillas de Smarty va
> {php}...{/php} [Valor por defecto = No]'; // urls
> $messages['help_request_format_mode'] = 'Elija uno de los
> siguientes formatos de URLs. Si piensa usar "URLs
> Personales", configure los formatos de las URLs si es
> necesario [Valor por defecto = Plain]';
>
> Modified: plog/branches/lifetype-1.2/locale/admin/locale_it_IT.php
> ===================================================================
> --- plog/branches/lifetype-1.2/locale/admin/locale_it_IT.php
> 2007-04-07 19:02:28 UTC (rev 5283)
> +++ plog/branches/lifetype-1.2/locale/admin/locale_it_IT.php
> 2007-04-07 19:13:31 UTC (rev 5284)
> @@ -614,7 +614,7 @@
> $messages['help_template_compile_check'] = 'Se abilitato,
> Smarty controller ogni volta se i file dello stile sono stati
> modificati, e, se s, user la nuova versione. Disabilitare per
> aumentare le prestazioni. [Predefinito = S]';
> $messages['help_template_cache_enabled'] = 'Abilita la cache
> degli stili. Se abilitata, la versione in cache dello stile
> verr utilizzata quando possibile. Non sar necessario estrarre
> dati dal database, e gli stili non dovranno venire
> ricompilati [Predefinito = S]';
> $messages['help_template_cache_lifetime'] = 'Tempo di validit
> in secondi della cache. Imposta a -1 per forzare la cache a
> non scadere mai. Se impostato a 0 la cache verr disabilitata,
> per ottenere lo stesso effetto tuttavia preferibile
> impostare l\'opzione template_cache_enabled a "No"
> [Predefinito = -1]';
> -$messages['help_template_http_cache_enabled'] = 'Abilita il
> supporto per le richieste HTTP condizionate. Se abilitate,
> pLog prender in considerazione l\'intestazione HTTP
> "If-Modified-Since", e spedir il contenuto solo se
> strettamente necessario. Abilita per risparmiare banda.
> [Predefinito = No]';
> +$messages['help_template_http_cache_enabled'] = 'Abilita il supporto
> +per le richieste HTTP condizionate. Se abilitate, pLog prender in
> +considerazione l\'intestazione HTTP "If-Modified-Since", e spedir il
> +contenuto solo se strettamente necessario. Abilita per risparmiare
> +banda. [Predefinito = S]';
> $messages['help_allow_php_code_in_templates'] = 'Permetti di
> incorporare codice PHP negli stili Smarty, racchiudendolo in
> blocchi {php}...{/php} [Predefinito = No]'; // urls
> $messages['help_request_format_mode'] = 'Seleziona uno dei
> formati URL disponibili. Se utilizzi URL personalizzati,
> imposta le opzioni qui sotto [Predefinito = Normale]';
>
> Modified: plog/branches/lifetype-1.2/locale/admin/locale_nl_NL.php
> ===================================================================
> --- plog/branches/lifetype-1.2/locale/admin/locale_nl_NL.php
> 2007-04-07 19:02:28 UTC (rev 5283)
> +++ plog/branches/lifetype-1.2/locale/admin/locale_nl_NL.php
> 2007-04-07 19:13:31 UTC (rev 5284)
> @@ -648,7 +648,7 @@
> $messages['help_template_compile_check'] = 'Controleer
> regelmatig of templates zijn aangepast, en gebruik deze
> wanneer dat het geval is. Schakel dit uit voor een betere
> performance [Standaard = Ja]';
> $messages['help_template_cache_enabled'] = 'Schakel template
> caching in. Dit zorgt ervoor dat er geen gegevens uit de
> database hoeven worden opgehaald en templates niet opnieuw
> vertaald te hoeven worden [Standaard = Ja]';
> $messages['help_template_cache_lifetime'] = 'Tijdsduur in
> seconden voor de template cache. Kies -1 om de cache zoveel
> mogelijk te benutten. Als de waarde op 0 staat, wordt caching
> uitgeschakeld. Het wordt echter aangeraden om in plaats
> daarvan template_cache_enabled op "Nee" te zetten [Standaard
> = 0]'; -$messages['help_template_http_cache_enabled'] =
> 'Schakel ondersteuning voor HTTP conditional requests in. Dit
> zorgt ervoor dat SP Communitiez de "If-Modified-Since" HTTP
> header gebruikt en alleen gegevens verstuurt indien dit
> strikt noodzakelijk is. Schakel dit aan om bandbreedte te
> besparen [Standaard = Nee]';
> +$messages['help_template_http_cache_enabled'] = 'Schakel
> ondersteuning
> +voor HTTP conditional requests in. Dit zorgt ervoor dat SP
> Communitiez
> +de "If-Modified-Since" HTTP header gebruikt en alleen gegevens
> +verstuurt indien dit strikt noodzakelijk is. Schakel dit aan om
> +bandbreedte te besparen [Standaard = Ja]';
> $messages['help_allow_php_code_in_templates'] = 'Sta toe dat
> PHP code in Smarty templates wordt gebruikt binnen
> {php}...{/php} blokken [Standaard = Nee]'; // urls
> $messages['help_request_format_mode'] = 'Selecteer n van
> onderstaande URL formaten. Als voor aangepaste URLs wordt
> gekozen, moeten alle onderstaande instellingen worden
> geconfigureerd [Standaard = Kaal]';
>
>
More information about the pLog-svn
mailing list